With the TABIEXPERT TX-60.GLASS we’ve managed to create a floor-to-ceiling glazed acoustic movable wall with a finish reserved for the most exclusive designs that still has the maneuverability and price of the more affordable models. This model creates a partition that does not visually block off spaces, providing the advantages of an open space while delivering the privacy and sound control needed for a high degree of concentration.
The TX-60.GLASS system offers 37 dB of airborne sound insulation in accordance with the UNE-EN ISO 717-1:2013 standard, certified by an ENAC/ILAC MRA accredited laboratory.
On a scale of perceived noise level, it converts an intrusive environment (for example, light vehicle traffic at some distance or a lively conversation) into a silent one, completely isolating the sound of a quiet reading room or office. Because of the reduced panel thickness (60 mm) and a locking system which requires no floor track or bolt, this range is ideal for small walls or private installations.
This panels are compatible with the TX-60, making it possible to combine panels from both models.
This model, with exposed framing, supports a unidirectional (single suspension) or multidirectional (double suspension) motion system via an aluminum track attached to a load-bearing ceiling support. The track is recessed in the dropped ceiling and can be finished off with a white casing to conceal the hardware, or with the same finish as the panels if there is no dropped ceiling.
The movable wall features separate panels that range from 800 mm to 1200 mm wide and fit together with an aluminum tongue-and-groove system that incorporates a magnetic strip for guaranteed panel interlocking. The core of the panels is formed by a sheet of 6+6 clear laminated glass supported by an aluminum frame.
The panels are locked into position by a double retractable seal that can be extended to the floor and a side-operated track activated with a 90º turn of the removable handle. The panels align vertically with the walls via fixed side jambs; the last panel has a lateral seal to lock the wall in place. The seals and joints are made with EPDM profiles and neoprene strips that guarantee flawless sealing and soundproofing.
Extras available separately:
- Track powder-coated
- Panel framing powder-coated
- Panels finished with veneered board
- Panels finished with translucent laminated glass
- Panels finished with laminated glass with a print film
- Interior crossbeams that form blocks according to the design
- Movable wall with fixed hinged door at the end of the movable wall
- Panel with inset pass door (cannot be the same as the locking panel)
- Panic bar built into the pass door leaf
- Solid panel with glazed surface
- Panels lock using a semi-automatic system
- Please consult us for other requirements
TX-60.GLASS projects:
